Hot Sale CO2 Curing Self-Hardening Alkaline Phenolic Resin - Sulfonic Acid Curing Agent for Self-hardening Furan Resin – Crownchem

Short Description:

Product Detail

Product Tags

Feedback (2)

Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science plus the theory of quality the basic, have faith in the main and management the advanced for Polyacrylamide Flocculant Water Treatment , Anionic Cationic Nonionic Water Treatment Polyacrylamide , Methyl Methacrylic Acid , Striving hard to attain continual success based on quality, reliability, integrity, and complete understanding of market dynamics.

Hot Sale CO2 Curing Self-Hardening Alkaline Phenolic Resin - Sulfonic Acid Curing Agent for Self-hardening Furan Resin – Crownchem Detail:

Packaging and Storage

Sealed packaging in plastic drums, net weight 25kg or 1000kg. Please store in a ventilated and cool place, avoid direct sunlight, and prohibit open flames.

It is strictly forbidden to directly mix with resin to avoid explosion accidents.

Please wear labor protection equipment when using it. If come into direct contact with your body, please immediately wash it with clean water and receive medical treatment if necessary.

Specifications / Model

MODEL	Density g/cm3	Viscosity mpa.s≤	Acidity in sulfuric acid %	Free sulfuric acid %≤	Applicable sand temperature range℃	Applicable scope
RHG-04	1.10-1.15	10-15	25	4-6	25–30	Gray Ductile Iron Casting
RHG-03	1.15-1.18	15-18	30	6-8	20-25	Gray Ductile Iron Casting
RHG-O9	1.16-1.20	16-20	35	8-9	15-20	Gray Ductile Iron Casting
RHG-10	1.25-1.30	20-25	40	9-11	0-10	Gray Ductile Iron Casting
RHG-12	1.30-1.35	20-25	45	12-14	below zero 5-10	Gray Ductile Iron Casting
RHG-16	1.35-1.40	25-30	50	16-18	below zero 10-15	Gray Ductile Iron Casting
RHG-AZ	1.35-1.40	20-25	Special for AB curing agent intelligent controller			Cast steel special
RHG-BZ	1.15-1.20	10-13				Cast steel special
RHG-A	1.16-1.20	16-20				Gray Ductile Iron Casting
RHG-B	1.10-1.15	10-13				Gray Ductile Iron Casting

AB Curing Agent Intelligent Controller

Keep the demoulding time constant: within the sand temperature 0-60 ℃, to achieve a constant mold release. Reduce head and tail sand.
The curing speed and the amount of addition are automatically adjusted according to the sand temperature and weather temperature.
Only high and low acidity sulfonic acid curing agent are needed throughout the year, which is convenient for production management.
Optimize the resin sand process: maintain the best ratio of curing agent, give full play to the effectiveness of the resin, reduce the amount of addition, improve the quality of the core, reduce casting waste, and increase economic benefits.
The addition amount of resin and curing agent, the flow rate of sand realize the screen display more intuitively.
Realize one-click conversion of resin addition amount of molding sand backing sand and surface sand, easy to operate, economical and practical, reduce resin addition amount.

FAQ

1. What are your prices?
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.

2.Do you have a minimum order quantity?
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website

3.Can you supply the relevant documentation?
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.

4.What is the average lead time?
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.

5.What kinds of payment methods do you accept?
You can make the payment to our bank account, Western Union or PayPal:
30% deposit in advance, 70% balance against the copy of B/L.

Product detail pictures:

Related Product Guide:

Control the standard by the details, show the power by quality. Our business has strived to establish a highly efficient and stable team staff and explored an effective good quality regulate course of action for Hot Sale CO2 Curing Self-Hardening Alkaline Phenolic Resin - Sulfonic Acid Curing Agent for Self-hardening Furan Resin – Crownchem , The product will supply to all over the world, such as: Miami, Czech, Johor, Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound solutions with good logistics service and economical cost. Depending on this, our solutions are sold very well in the countries in Africa, the Mid-East and Southeast Asia.

CAS 98-00-0 Furfuryl Alcohol 98%

Chemicals Used In Foundries

Cold Core Box Furan Resin

Furan Resin Chemistry

Furan Resin Mortar

Furan Resin Properties

Furfuryl Alcohol 98% Organic Synthetic Raw Material

Furfuryl Alcohol Resin

Hot Core Box Furan Resin

Self-Hardening Furan Resin

Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!

By Maud from Austria - 2017.06.22 12:49

This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately， we successfully completed the procurement tasks.

By Ivan from Haiti - 2018.06.18 19:26